Our TAC-41 magazine carriers are designed to work with Silverback TAC-41 magazines. These magazine carriers have the option to be mounted onto molle webbing or belts. All magazine carriers have the ability to be mounted either way around by swapping the side the mounting system is attached on. The magazine carriers also come with adjustable retention for the ability to tighten or loosen the grip the carrier has on your magazines. This can be achieved by tightening or loosening the screws on the wing of the magazine carrier until you reach your desired amount of retention.
This Magazine Carrier uses an MRD (Magazine Retention Device) which provides adjustable retention to the back of the magazine, allowing the carrier to hold on to the magazine with the perfect amount of resistance. To adjust the retention on the Magazine Carriers you need to screw or unscrew the silver grub screw found on the side of the carrier with a 1/8” Allen key/hex key. Please note that the magazine can only be inserted into the Magazine carrier in one orientation.
Features:
-
Made from 2mm P1 Kydex T Thermoplastic
-
All Mounting screws will have threadlock pre-applied to stop them from backing out or coming loose over time
-
Adjustable Retention
-
Left or right side mounting
-
Fits onto molle or up to 2” wide belts
-
Up to 20° forward or backward cant
Once you have the Magazine Carrier set up, we strongly advise using a Threadlock or Loctite to ensure all screws won’t come loose over time and use (even a dab of superglue will do the job!)
