870 Breaching Shotgun Carrier
Every 870 Breaching Shotgun Carrier will include x5 Male mounting screws, x5 Female Mounting Screws, x4 Rubber Mounting Spacers and x1 DCL Combat Loop for Belt mounting, x1 DCL Locking Bung and x1 Retention strap.
To remove or adjust the mount included with the carrier, simply open the mount, place one finger inside the carrier on the back of one of the female mounting screws and with a Phillips head screwdriver undo the male screw on the outside face of the carrier. If you are unable to apply enough pressure to the back of the female mounting screw inside the carrier, try putting a wide rubber band between your finger and the female mounting screw you’re trying to undo.
The 870 Breaching Shotgun Carriers also come with adjustable retention for the ability to tighten or loosen the grip the carrier has on your shotgun. This can be achieved by tightening or loosening the screws along the top edge of the 870 Breaching Shotgun Carrier until you reach your desired amount of retention. Please note that the shotgun can only be inserted into the carrier in one orientation (barrel first).
Made from 3mm P1 Kydex T Thermoplastic
All Mounting screws will have threadlock pre-applied to stop them from backing out or coming loose over time
Left or right side mounting
Fits onto up to 2” wide belts
If during use, you have any issues with the function of the Magazine Carrier, do not hesitate to contact us through the form on this website or email us at Sales@kydexcustomsuk.com